Description
Click on the images to see them in larger.
General characteristics of the V Models:
- An instrument based on a microprocessor with connectivity through a RS-232/USB port.
- Able to perform a control at the end of the production line of large productions.
- It provides information by means of a digital display when failure occurs in the piece of equipement being tested. It also has a sound alarm.
- Connected to PC by means of an optional software (PRG System), it allows to acquire test data for statistic analysis and reports.
- It incluyes four (4) periodic calibration verifiers required by certifiers plus a PERIODIC VERIFICACIÓN CHART/TABLE so as to keep the required records as compulsory.
V2 Model:
- Designed to test CLASS II products
- It performs Dielectric Rigidity Test also with leakage current evaluation
- Leakage current measurement
- Test voltage though fixed can be configurated at the request of the customer.
- Standard values: 1250Vca, 1500Vca, 1750Vca, 2500Vca, 3750Vca
- A sound alarm and the display indicate failure status when it detects a current drain that is higher than the cut-off.
- Safe operation system for the equipment operator.
- It informs about the current drain measured in the dielectric rigidity test through the display.
- Its USB/RS232 connection and its microprocessing capacity allows for a flexible performance in intelligent application/instrumentación.
V1 Model:
- Designed to test CLASS I
- Additional to V2, this piece of equipment incorporated ground test
- Standard voltage test: 12Vca
- Shunt limited current up to 25/30 Amperes (according to norm)
- It indicates when GROUND CABLE RESISTANCE is higher than 0.1 / 0.2 ohm according to what has been predetermined
- Visual and sound indicators are similar to V2
SAD 9000 PRG
- Additional software for V Equipment
- Allows to upload product data and to register the test.
- Allows to register test values and their use by means of a standard PC.
- Allows to perform statistic analysis for quality and production reports.
