|
|
|
|
Featured Equipment
SAD 9000 KIP
Access Probes Kit to perform tests of IP First Numeral according to standard IEC60529, for standards IEC 60335, 60598, ...
SAD 9000 T
Electrical Safety minilab production control and quality assurance. Up to 32 amperes multivoltage test.
SAD 9000 S
Automatic Seed Analyzer
|
|
|
Accessories
SAD 9000 K - Fire Risks Test Chamber |
Fire Risks Test Chamber
Specifications
The fire risks test chamber is a closed chamber, where the glow wire, tracking index and needle flame tests are run safely. Its volume is bigger than 0.5 m³ (cubic meters) in order to avoid effects on the result of the test for the lack of oxygen. In this case the chamber has 0.55m ³.
Equipment:
• Volume increased to 0.5 cubic meters
• Handheld Light Meter: illumination level meter (according to standard, not more than 20lux shall the sample be affected by, prior to testing).
• Lighting of the camera: Composed of 2 fluorescent TL2004B model of 20W each, used individually for the proper disposal of samples; they are in the rook of the cabinet. 4-way outlet to power up the test equipment
• Ventilation located on the top after completion of the trials.
|
|
|
| General Considerations |
- MANUFACTURED ACCORDING TO ISO 9001:2008 CERTIFIED QUALITY CONTROL SYSTEM.
- CALIBRATION REPORTS WITH PROPER TRACEABILITY AND UNCERTAINTY, FOLLOWING THE REQUIREMENTS OF ISO17025
- IT FULFILLS ALL TRADEMARK CERTIFICATION REQUIREMENTS AS AN EQUIPMENT FOR CONTROL THE END OF THE PRODUCTION LINE.
- INTEGRATED PATTERN SYSTEM FOR PERIODIC CHECK UP (PATTERN SET UP).
- ARGENTINEAN INDUSTRY.
- BORNED OVER 20 YEARS EXPERIENCE IN ELECTRICAL SAFETY.
- EQUIPMENTS SET UP IN ARGENTINA, CHILE, URUGUAY, CUBA AND MÉXICO.
- ALL EQUIPMENT HAVE PERIODIC VERIFICATION UNITS IN ORDER TO COMPLY WITH CERITIFICATION ORGANISM AUDITS.
|
|
|
|
|
|